0 installing transact for windows, 1 installation – Rice Lake TransAct 2.0 User Manual
Page 4
3
Installation
2.0
Installing TransAct for Windows
TransAct for Windows requires the following hardware and software:
•
An IBM-compatible computer, 486-75 MHz or higher CPU
•
At least 8 MB of RAM (16 MB RAM is highly recommended)
•
A fixed hard disk with a minimum of 4 MB of available disk space
to install the program files
•
VGA, SVGA, or higher resolution monitor
•
DOS version 5.0 or higher
•
Windows Version 3.1 or later running in enhanced mode
During installation, the setup program installs all of the files to run
TransAct, the initialization files, and all icons associated with the program.
These instructions explain how to install TransAct on an individual
workstation using Windows 3.1 or Windows 95. Before running the setup
program, ensure that your system is currently running Windows 3.1 or
higher. It is important to be familiar with the basic navigation techniques of
using Windows. If you are not familiar with moving around in Windows,
review your Windows User’s manual.
Note: Before beginning the installation, quit any open programs, then log off
any networks to which your computer is connected.
2.1
Installation
Insert the TransAct diskette labeled Disk: 1 of 3 in drive A or B.
Windows 3.1:
Choose File | Run from the
Program Manager menu.
Windows 95:
Select Start from the taskbar.
Then
click
Run.