Weigh modules, Single-ended beams, Typical applications – Rice Lake Weigh Modules/Mount Assemblies User Manual
Page 38
2-9
WEIGH MODULES
Single-Ended Beams
SIDE STOP
FIXED PIN
Figure 2-17: Paramounts on suspended hopper
FREE
FREE
SIDE
FIXED
FREE
FREE
Figure 2-16: Paramounts mounting system on cylindrical tank
Teflon is a registered trademark of E.I. Dupont
Typical Applications
A three-module system would use one of each module. Scales
requiring more than three modules use additional free sliding
modules. Figure 2-16 is a typical example of a six-module system.
The fixed pin module fixes the vessel in the corner, allowing it to
rotate about the loading pin only. The vessel will expand outward
from this corner. The side stop module placed at the opposite end
keeps the vessel in check but does not restrict the expansion. The
use of four free-sliding modules ensure that the vessel’s expansion/
contraction is unrestricted in either direction.