Sage Kitchen Wizz Pro BFP800UK - Manual (Page 10)

9
gettIng to KnoW yoUr neW aPPlIanCe
A. Small Food Pusher
For improved processing control of smaller
ingredients. It also doubles as a measuring
cup for adding/measuring ingredients.
The food processor will run continually
whether the small pusher is in or out.
B. Large Food Pusher
For pushing food down the feed chute.
The food processor will not start unless the
large pusher is in place correctly.
C. Extra Wide Feed Chute
For larger ingredients.
D. Processing Lid
Locks onto the processing bowl.
E. PULSE Button
Press down and hold briefly for
short bursts of power. The motor will
automatically stop after the PULSE button
has been released.
F. POWER/OFF Button
Provides power to the food processor unit
only. Start/Pause is required to be pressed
to start operating the food processor.
G. Feed Chute Safety System
Prevents the motor from operating unless
the bowl and lid are correctly locked in
position, and large feed pusher is inserted.
H. Silicone Seal
Reduces the chance of leakage
while processing large volumes of
liquid ingredients.
I. Processing Bowl With Handle
15 cup bowl for dry ingredients and 10
cups for liquid (thick, wet ingredients e.g.
soups). The processing bowl locks onto the
motor base.
J. Count Up & Count Down Timer
Used to set desired time required for
processing. Can count up or down,
stopping the processor once the time is
reached in count down mode.
K. LCD Display
Displays the timing function.
L. Direct Drive Motor Base
2000W induction motor with safety
braking system.
M. Non-skid Rubber Feet
For added safety and stability.
N. Julienne Disc
Use this disc for julienning vegetables.
O. Chip Cutter
Use this disc for chipping vegetables.
P. Reversible Shredder
Use one side for small/thin shredding and
the other side for coarse shredding.
Q. Adjustable Slicer
Use this disc for slicing ingredients.
Able to slice from 0.5mm – 8mm thick.
R. Whisk/Emulsifying Disc
Use this attachment for whisking of eggs
and cream.
S. 4 Blade Processor
Swift action for chopping, mixing,
whipping and blending a variety of
ingredients.
T. Dough Blade
Blunt blade designed for a softer action of
combining dough ingredients.
U. Mini Processing Blade
Used for chopping, mixing, and blending a
variety of ingredients.
V. Disc Spindle
Fits onto bowl drive coupling and is used
to hold the reversible shredder, julienne,
chip cutting, whisk and adjustable slicing
discs in position.
W. Storage Container with Lid
Used for storing all discs and blades when
they are not in use.
not SHoWn
Cleaning Brush
For cleaning the processor bowl, blades and
discs. The flat end is designed as a scraper to
remove food particles from crevices.
Plastic Spatula
For scraping the sides of the bowl helping to
process ingredients evenly.
Mini Processing bowl
For processing small volumes of ingredients.
Cord Storage
Cord can be pushed into the housing to
reduce length.
Sage™ by Heston Blumenthal‰ Assist Plug
Ergonomic ring-pull design allows the
power plug to be easily removed from the
power outlet.