Sage Kitchen Wizz Pro BFP800UK - Manual (Page 12)

11
PAge heAder..... aSSemBlIng yoUr neW aPPlIanCe
5. Place the processing lid onto the
processing bowl so the feed chute is
slightly right of the bowl handle and
the arrow graphics are aligned .
Holding the feed chute and pressing
down firmly at the same time, turn
the lid clockwise (as indicated by the
graphic) so the ‘Locking Tab’ on the
lid slots into the ‘Interlocking Safety
Catch’ on the handle. The lid should
be securely locked into position.
note
The food processor will not operate
unless both the processing bowl and
lid are correctly locked into position.
CAUTION
The processing blade (including
the mini bowl blade) and discs are
extremely sharp, handle with care at
all times.
6. Insert the power plug into a
230/240 volt power outlet and
switch the power outlet on.
7. Press the POWER/OFF button to
turn your food processor on. The
red light illuminates around the
POWER/OFF button to indicate that
the processor is on.
Your food processor has
POWER/OFF, START/PAUSE and
PULSE buttons to give total control
when processing food. Press the
START/PAUSE button to switch the
motor on and operate continuously.
note
The food processor will not start
unless the large food pusher is
inserted correctly into place.
8. Press the POWER/OFF button to
switch the motor off. When short
bursts of power are required, press
the PULSE button and hold down
briefly, release, then press again. The
PULSE action will automatically stop
when the button is released.
9. To set the timer, press the
buttons located to the left of the
timing window. Time will move up
by 5 second intervals, from 0 to
30 seconds. From 30 seconds to 2
minutes the time will increase in 10
second intervals and from 2 minutes
to 9.59 minutes the time will
increases in 20 second intervals.
10. Once the time is set, press the
START/PAUSE button and the timer
will start to count down.
11. Ensure the large food pusher is
inserted correctly into place. The
food processor will not start until
pusher is in place.