SINGER 1512 PROMISE II Instruction Manual - Manual (Page 34)

For hems, curtains, trousers, skirts, etc.
Blind hem for stretch fabrics.
Blind hem/ lingerie for firm fabrics.
It takes practice to sew blind hems. Always make a
sewing test first.
Note:
Blind Hem:
Turn up the hem to the desired width and press. Fold back
(as shown in Fig. 1) against the right side of the fabric with
the top edge of the hem extending about 7 mm. (1/4") to the
right side of the folded fabric.
Start to sew slowly on the fold, making sure the needle
touches slightly the folded top to catch one or two fabric
threads. (2)
Unfold the fabric when hemming is completed and press.
Turn up the hem to the desired width and press. Place fabric
right side up with edge of hem to the left. Begin sewing so
the needle swings off the left edge of the fabric to form a
small scallop. Tightening the tension slightly will produce a
deeper scallop.
Lingerie Stitch :
Blind Hem
2
1
EN
34