SINGER 321D-241M-24 INDUSTRIAL SERGER - Manual (Page 5)

• To avoid the risk of electric shock,
do not open the motor wiring box
and do not touch the components
assembled inside the wiring box.
• To avoid injuries do not run the
machine without the belt cover or
in case any other safety device is
removed.
• To avoid possible injuries keep fin-
gers, head and clothes far from
wheel, belt and motor when the ma-
chine is running. Nothing should be
placed near those parts.
• To avoid injuries never put your
fingers next to the rotating hook
and the thread take-up lever cover
when the machine is running.
• To avoid possible injuries be care-
ful when putting down or lifting
the machine head.
• To avoid accident in case of a sud-
den start of the machine always
turn it off when laying it down, or
remove the belt cover and the belt.
• If you machine is equipped with
a servomotor, it does not make
noises while being driven.To avoid
a possible accident caused by an
unexpected start, be sure the ma-
chine is turned off.
• To avoid electrical shock, do not
run the machine without proper
grounding.
• To minimize the risk of accidents
or damage in electric components
caused by electric discharge turn
the machine off before unplug-
ging it.
• Clean the machine periodically.
1.2
For Safe
Operation
2 Ultra High Speed Overedge and Safety Stitch Machine | Instruction Manual and Parts List