Sewing on buttons (model 3223) – SINGER 3229 SIMPLE User Manual

Page 42

Advertising
background image

Install the darning plate. (1)
Change the all purpose foot to button sewing foot. (2)

Position the work under the foot.
Place the button in the desired position and lower the foot.
Set the pattern selector dial on "

" and sew a few

securing stitches. Select one of the two narrow zig-zag

patterns according to the distance between the two holes of

the button. Turn the handwheel to check if the needle goes

into the right and the left hole of the button without hitting the

button. Slowly sew on the button with about 10 stitches.

Select pattern " " and sew a few securing stitches. (3)

If a shank is required, place a darning needle on top of the

button and sew. (4)
For buttons with 4 holes, sew through the front two holes first,

push the work forward and then sew through the back two

holes.

Sewing on Buttons (Model 3223)

35

4

3

1

2

EN

Advertising
This manual is related to the following products: