SINGER 580 ROTARY STEAM PRESS - Manual (Page 11)

Functions
Manual Release for Service Case
When needed, it is possible to raise the iron roller to a service
position.
You can raise the iron roller to this position only when
the power is turned Off . The roller must be in non-ironing
position (roller up).
To operate, push the release lever manually back to the red
strip located on the side of the unit which is approximately
180° from the original position of the lever (see picture).
The ironing roller is raised to the service position - two
inches over the heating shoe. To return the roller back, pull
the manual release lever completely forward to the original
position.
About the telescopic mechanism
of the lever:
The release lever has a telescopic feature to simplify the
use of the lever. If you have diffi culty in pushing the lever in
folded position, then pull to unfold the telescopic arm. This
will reduce the force necessary for moving the lever in both
directions.
Return the telescopic lever back to the folded position after
usage.
9
A C
B
!
Note: Never switch ON the Rotary Steam Iron when
the ironing roller is raised to the service position.