Setting up the rotary steam iron, Folding the rotary steam iron for storage – SINGER 580 ROTARY STEAM PRESS User Manual

Page 8

Advertising
background image

Functions

!

1

2

3

5

6

SETTING UP THE ROTARY STEAM IRON

1. To set up your Rotary Steam Iron, fi rst unhook the power cable. With

your left hand, tightly grip the Connecting Rod (A) in the lower third
area. With your right hand, push the Locking Lever forward and hold it
pressed. To prevent the Rotary Steam Iron from rolling away, place one
foot in front of or on the frame.

2. Raise the ironer slightly and then release the Locking Lever.

3. Now raise the Rotary Steam Iron with both hands up till it stops in the

fully upright position, making sure that the Locking Lever engages.
You should hear it click into place. The Rotary Steam Iron can be easily
rolled on its rollers.

4. Connect the power cable plug of the Rotary Steam Iron into the socket.

Note: Remove the protective paper (wrapped around the ironing

roller for shipping) and discard it.

FOLDING THE ROTARY STEAM IRON
FOR STORAGE

5. Before folding the Rotary Steam Iron, unplug the power cable from the

socket. The Rotary Steam Iron must be completely cooled down. With
the left hand, grip the connecting rod and raise it slightly. Push the bolt,
located on the underside of the collecting table, with your right hand
until it disengages.

6. Allow the ironing roller to lower slowly until you hear it engage the

locking mechanism. The Rotary Steam Iron can be easily rolled on its
rollers.

4

A

Advertising