Snow Joe TRJ601E-RM Trimmer Joe 4-Amp 12-Inch Electric Grass Trimmer/Edger - Manual (Page 6)

6
Adjusting the telescopic shaft
1. Loosen the telescopic shaft adjustment knob.
2. Pull and adjust the shaft to a comfortable height (Fig. 5).
3. Tighten the knob once the desired length is achieved
(Fig. 5).
Adjusting the angle of cutting head
m
WARNING! Always unplug the trimmer before making
any adjustments to the trimmer.
1. Slide the locking lever down and hold (Fig. 6).
2. Twist the operation handle to the desired position.
3. Release the locking lever.
m
WARNING! Never use steel, wire, rope, string, or other
materials as cutting line. Other materials can break off during
cutting and become a dangerous missile that can cause
serious injury.
Application
Replacing the spool
1. Disconnect the main plug.
2. Press together both locking device tabs on the spool cover
and remove the cover (Figs. 7-8).
3. Remove the spool from the spool cover (Fig. 9).
4. Remove the spring and clean out any dirt or grass residue.
Screws
Fig. 4
Telescopic shaft
adjustment knob
to tighten
the knob
Lower shaft
adjustment knob
Fig. 5
90°
180°
Fig. 6
Locking
lever
Locking
devices
Spool
cover
Spool
Fig. 7
Fig. 8
Fig. 9
Spool