Cisco OL-5378-01 - Manual

C H A P T E R
45-1
Cisco CallManager Administration Guide
OL-5378-01
45
Cisco IP Phone Configuration
Cisco IP Phones as full-featured telephones can plug directly into your IP
network. You can use the Cisco CallManager Administration phone configuration
windows to configure the following Cisco IP Phones and devices:
• Cisco IP Phone 7900 family (models 7960, 7940, 7935, 7936, 7920, 7910,
and 7905)
• Cisco IP Phone model 30 VIP
• Cisco IP Phone model 12 SP+
• H.323 clients
• Computer Telephony Integration (CTI) ports
• Cisco ATA 186 telephone adapter
• Cisco VG248 Analog Phone Gateway
Note You configure the Cisco VG248 phone ports from the Gateway
Configuration window of Cisco CallManager Administration. The
following procedures apply for updating or deleting
Cisco VG248 phone ports. See the
“Gateway Configuration” section
on page 44-1 for Cisco VG248 gateway configuration information.
After you add a Cisco IP Phone to Cisco CallManager Administration,
information from the RIS Data Collector service displays in the Phone
Configuration window. When available, the IP address of the device and the name
of the Cisco CallManager with which the device registered display.