Cisco OL-5378-01 - Manual (Page 17)

45-17
Cisco CallManager Administration Guide
OL-5378-01
Chapter 45 Cisco IP Phone Configuration
Configuring Cisco IP Phones
Location Choose the appropriate location for this Cisco IP Phone.
The location specifies the total bandwidth that is
available for calls to and from this location. A location
setting of None means that the locations feature does not
keep track of the bandwidth that is consumed by this
Cisco IP Phone.
Note If this phone uses the Barge feature, set the
Location to None.
User Locale From the drop-down list box, choose the locale that is
associated with the phone user interface. The user locale
identifies a set of detailed information to support users,
including language and font.
Cisco CallManager makes this field available only for
Cisco IP Phone 7905, 7940, and 7960 models.
Note If no user locale is specified, Cisco CallManager
uses the user locale that is associated with the
device pool.
Note If the users require information to be displayed
(on the phone) in any language other than
English, verify that the locale installer is
installed before configuring user locale. Refer to
the Cisco IP Telephony Locale Installer
documentation.
Table 45-1 Phone Configuration Settings (continued)
Field Description