Manual setting – Canon ImageCLASS MF4270 User Manual
Page 24
22
The LCD display turned off:
The machine may enter the sleep mode while you are
setting up the machine. Press [Energy Saver] to turn the
machine back on and continue the setup.
1
Press [Additional Functions].
2
Press [
] or [
] to select <12 SYSTEM
SETTINGS>, then press [
OK
].
3
Press [
] or [
] to select <2 NETWORK
SETTINGS>, then press [
OK
].
4
Press [
] or [
] to select <4 VIEW IP
ADDRESS>, then press [
OK
].
●
5
Press [
] or [
] to select <1 IP ADDRESS>,
<2 SUBNET MASK>, or <3 GATEWAY ADDRESS>,
then press [
OK
].
If the machine is communicated with the network
properly, the IP address, subnet mask and gateway address
are displayed.
If not, IP address, subnet mask and gateway address are
not displayed.
If the machine does not get the IP address 30 seconds after
you connect the LAN cable, turn off the main power switch
once, and then turn it on again and wait for another 90
seconds. If the machine still does not get the IP address,
ask your network administrator.
We recommend you to take a note of the IP address you
confirmed here, because you need it for “Using the Remote
UI” in the Reference Guide.
6
Press [Stop/Reset] to return to the standby
mode.
If they are not displayed, that indicates that the machine is
not communicated with the network. Please check the
setting of the IP address.
Software Settings with Computer
This is the setting for the Static IP. If the machine gets IP address automatically in “Automatic Setting”, skip
this setting.
In this setting, you enter the IP address, subnet mask, gateway address manually. [Additional Functions]
→
<12 SYSTEM SETTINGS>
→ <2 NETWORK SETTINGS> → <1 TCP/IP SETTINGS> → <1 IP ADDRESS AUTO> →
<OFF>
→ <2 IP ADDRESS> → Enter the IP address → <1 TCP/IP SETTINGS> → <3 SUBNET MASK> → Enter the
subnet mask
→ <1 TCP/IP SETTINGS> → <4 GATEWAY ADDRESS> → Enter the gateway address number →
Press [Stop/Reset]
→ Turn off the main power → Restart the machine. For details on this setting, see
Chapter 6, “Network,” in the Reference Guide. Once you complete the setting, please proceed to “Checking
the IP Address Setting,” on p. 21.
Manual Setting