Canon ImageCLASS MF4270 - Manual (Page 25)

23
Installation Procedure
1
2
If the MF4200 Series CD-ROM Setup
screen is not displayed, click [start] on
the Windows task bar → [My
Computer].
Windows Vista: click [start] on the
Windows task bar → [Computer].
Windows 2000: double-click [My
Computer] on the Windows desktop.
Open the CD-ROM icon, then double-
click [MInst] ([MInst.exe]).
3
While installing the software on a
computer running Windows Server
2003, the display in this step does not
appear.
4
5
6
If the firewall is applied to the
operating system, the dialog box
below appears. Click [Yes] and
continue the installation.
Software Settings with Computer
Before Installation
For Windows 2000/XP/Server 2003/Vista, logon as Administrator to install the software.
On the screen shown at each step, click on the circled button to proceed.
Make sure the machine is turned on.
(See “Connect the Power Cord and Turn On the Machine,” on p. 10.)
Make sure the network cable is connected to the machine.
(See “Connect the Machine to a Network,” on p. 21.)
Make sure an IP address is assigned to the machine.
(See “Checking the IP Address Setting,” on p. 21.) •
•
•
•
•