Thetford 40538 SmartTotes User Manual
Smarttote, Autostop, Level gauge kit
Before Beginning
4
Read all instructions com-
pletely.
4
Wear protective gloves,
glasses, long sleeves, and
nose/face mask to avoid con-
tact with human waste.
4
For hygienic reasons, rinse
tank and hose thoroughly.
SmartTote
®
AutoStop
TM
Level Gauge
Kit
Made in the USA
Thetford Corporation
Ann Arbor, MI 1-800-521-3032 www.thetford.com
F#
40620
2/07
Part No.
40531
1. Pull old lanyard from tank
body.
2. Turn old Level Gauge clock-
wise until two finger tabs line
up with “O”s on tank body. Lift
off old Level Gauge. Discard.
3. Line up and insert new Level
Gauge into tank. Turn counter-
clockwise until finger tabs line
up with “V”s on tank.
4. Connect lanyard on tank.
Holding Tank Accessories
Before Beginning
4
Read all instructions com-
pletely.
4
Wear protective gloves,
glasses, long sleeves, and
nose/face mask to avoid con-
tact with human waste.
4
For hygienic reasons, rinse
tank and hose thoroughly.
SmartTote
®
AutoStop
TM
Level Gauge
Kit
Made in the USA
Thetford Corporation
Ann Arbor, MI 1-800-521-3032 www.thetford.com
F#
40620
2/07
Part No.
40531
1. Pull old lanyard from tank
body.
2. Turn old Level Gauge clock-
wise until two finger tabs line
up with “O”s on tank body. Lift
off old Level Gauge. Discard.
3. Line up and insert new Level
Gauge into tank. Turn counter-
clockwise until finger tabs line
up with “V”s on tank.
4. Connect lanyard on tank.
Holding Tank Accessories