Universal Remote Control (URS) THZ-100 - Manual (Page 38)

Page 34
THZ-100 T
HERMOSTAT
Selecting Auto Dimming
If auto dimming is turned on, then the bottom item in the list on this
screen shows, Auto Dimming ON. If auto dimming is turned off then the
bottom item in the list on this screen shows, Auto Dimming OFF.
If you desire to change the auto dimming state of your thermostat LCD dis-
play then use the arrow keys to move the highlight bar to Auto Dimming
to toggle this option.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to select this option. If you decide to cancel the operation
then press the key below the Cancel key label in the smart-key label at the
bottom left of the display.
Viewing THZ-100 Thermostat Information
The Information selection in the Options screen is used to display various
THZ-100 thermostat parameters to indicate how the thermostat was setup
as well as some wireless signal strength information. This information is not
used in normal operation.
Setting the Date and Time
If your THZ-100 has lost wireless communication with the MRX Advanced
Network System Controller main unit, the Options list includes an option
to set the date and time. If you desire to set the date and/or time then use
the arrow keys to move the highlight bar to Date & Time.
Press the key below the OK key label in the smart-key label at the bottom
right of the display to change your settings. If you decide to cancel the
operation then press the key below the Go Back key label in the smart-key
label at the bottom left of the display.
After pressing OK, the screen updates to give you a list of the date and
time entries that you can change. The left column displays Month, Day,
Year, Hour, and Minute. The right column displays the current value. Use
the arrow keys to move the highlight bar to value you wish to change.
in the smart-key label at the bottom right of the display to select this option.
If you decide to cancel the operation then press the key below the Cancel
key label in the smart-key label at the bottom left of the display.