Your wine cabinet, Installation instructions – Vintage Cellars LOFT 1200 User Manual

Page 2

Advertising
background image

2

1. Your Wine cabinet

IMPORTANT SAFETY INSTRUCTIONS

WARNING

To reduce the risk of fire, electrical shock, or injury when

using your appliance, follow these basic precautions:

 Read all instructions before using the Wine Cooler
DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not only problems of the past. Junked or abandoned appliances are still
dangerous… even if they will “just sit in the garage for a few days”.

Before you throw away an old wine Cooler: Take off the door. Leave the shelves in place so that children

may not climb inside easily.

 Never allow children to operate, play with, or crawl inside the appliance.
 Never clean appliance parts with flammable fluids. The fumes can create a fire hazard or explosion.
 Do not store or use gasoline or any other flammable vapors in the vicinity of this appliance. The fumes can

create a fire hazard or explosion.

-Save these instructions-

2. INSTALLATION INSTRUCTIONS

Before Using Your Wine Cooler

 Remove the exterior and interior packing.
 Before connecting the Wine Cooler to the power source, let it stand upright for approximately 2 hours.

This will reduce the possibility of a malfunction in the cooling system from handling during transportation.

 Clean the interior surface with lukewarm water using a soft cloth.
 Install the handle on the left side of the door.

Location of Your Wine Cooler

 This appliance is designed for free standing installation or can be built-in (fully recessed).
 Place your Wine Cooler on a floor that is strong enough to support it when it is fully loaded. To level your

Advertising