Unpack the winekoolr – Vintage Cellars WineKoolR User Manual
Page 7
7
Do not use if power cord is damaged; it must be replaced by the manufacturer or by a qualified
person to avoid a hazard. Plug must remain accessible after installation.
Test line voltage before operating, and do not use if line voltage is less than 105V.
Unpack the WineKoolR
Excessive Weight Hazard
Use two or more people to move and install your WineKoolR.
Failure to do so can result in back or other injury.
Remove the Packaging
■
Open boxes and read the:
USE and CARE GUIDE
ASSEMBLY and OPERATION MANUAL.
■
Do not use sharp instruments.
■
Dispose of/recycle all packaging materials.
Clean your WineKoolR , small pieces of packing material might need to be vacuumed out!
Inspect for shipping damages
Report any major damage to: www.koolr.com
Cosmetic damages are not covered by the warranty.
NOTICE: