Vintage Cellars SC Series WhisperKOOL - Manual (Page 17)

www.whisperkool.com | Page 15
Drain Line
All units come with a drain line for additional removal of
excessive condensate. It is mandatory to install the drain line
with a “T” fitting. During operation, the cooling unit will strip
excess water from the air in order to maintain the proper level
of humidity within the cellar. However, in extreme humidity,
additional condensate will be removed. The drain line will
prevent overflow and leaking by allowing for discharge of the
additional condensate.
Failure to install the drain line voids the warranty.
To prevent mold from growing, allow the drain line
to hang above the water line.
Condensation Drain Line Tube
The condensation drain line tube is used to remove excess condensation from the unit to a proper discharge location.
It is important that the drain line tube is properly connected and used to prevent leakage and other problems
associated with excess condensation.
Failure to use the condensation drain line tube will void the warranty on the unit.
WRONG: Drain line is under water.
DRAIN LINE