Installing the evaporator unit with attic access – Vintage Cellars Ceiling Mount User Manual
Page 18
Page 16 | 1-800-343-9463
WCM
033114
INSTALLING THE EVAPORATOR UNIT WITH ATTIC ACCESS
PREPARING THE EVAPORATOR FOR INSTALLATION CONTINUED
12.
If you have purchased the Active Humidity Option, route the 1/4” water line out of the evaporator unit with the
drain line.
13.
Reinstall the protective caps on the end of the line set to prevent debris from entering the system.
14.
Reinstall the Top Access Panel and fasten the 16 screws into place.
15.
Secure the mounting bracket to the unit as outlined on the next page.
Note: It is highly recommended to use only the mounting locations provided. These locations ensure that the
installer will not drill into any copper or electrical within the system.
LINE SET
MOUNTING BRACKET
DRAIN LINE
POWER CABLE
WIRING
KNOCKOUT
BOTTLE PROBE &
KEYPAD WIRING
KNOCKOUT