Vintage Cellars Mini Ceiling Mount - Manual (Page 13)

www.whisperkool.com | Page 11
Minimum Tools Needed:
Fully Exposed
Mounting Option
Flush Mount
Mounting Option
Choose a Mounting
Option suitable
for the installation
location.
Partially Recessed
Mounting Option
Locate the desired installation location. Using a stud finder, locate the
ceiling joists on either side of the center point. Cut and frame an opening in
the ceiling measuring 12” x 22.75”. Make sure the framing is sufficient to
support the weight of the cooling unit. It is highly recommended to use
only the mounting locations provided. These locations ensure that the
installer will not drill into any copper or electrical within the system.
Hammer Saw
Phillips Head #2
Screwdriver
PREPARING THE INSTALLATION LOCATION
T-Square
1
2
3
4
11.08”
11.08”
4.3”
4.3”
6.78”
6.78”