Vintage Cellars WS-9066U-IT-CBP - Manual

1
LCD
Display
Function keys
WS-9066U-IT
WEATHER STATION
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-
art weather station as an example of innovative
design and quality piece of engineering.
Provides time, calendar, weather forecast, moon
phase, indoor and outdoor temperature, indoor
and outdoor relative humidity. This unit will
never keep you guessing on current and future
weather conditions. Operation of this product is
simple and straightforward. By reading this
operating manual, the user will receive a better
understanding of the Weather Station.
FEATURES:
The Weather Station
2
Stand
Function keys
x 12/24 hour time display
x Calendar display (year only in setting
mode)
x Display 8 Moon phases throughout the
year
x Temperature display in ºC/ ºF
x Indoor and outdoor temperature display
with MIN/MAX records
x Indoor and outdoor humidity display
x Humidity data display as RH%
x Low battery indicator
x Table standing or wall mounting
Battery
compartment
Hanging
hole
3
Thermo-Hygro Transmitter
x Wall mount bracket
x Mounting at a sheltered place.
x Avoid direct rain and sunshine
DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD, OR
RECHARGEABLE BATTERIES
TO INSTALL AND REPLACE BATTERIES
IN THE THERMO-HYGRO TRANSMITTER
The outdoor thermo-hygro transmitter uses 2 x
AAA, IEC LR3, 1.5V batteries. To install and
replace the batteries, please follow the steps
below:
1. Remove the battery cover.
2. Insert the batteries,
observing the correct polarity (see
battery compartment marking).
3.
Replace the battery cover
on the unit.
Note:
In the event of changing batteries
in any of the units, all units need
to be reset by following the setting up
procedures. This is due to a random security
Wall mount bracket
Remote transmission of outdoor
temperature and humidity to
weather station by 915MHz
4
code assigned by the transmitter at start-up.
This code must be received and stored by the
weather station in the first 3 minutes of power
being supplied to the transmitter.
TO INSTALL AND REPLACE BATTERIES
IN THE WEATHER STATION
The weather station uses 2 x AAA, IEC LR3,
1.5V batteries. To install and replace the
batteries, please follow the steps below:
1. Insert finger or
other solid object in
the space at the
bottom center of the
battery compartment
and lift up to remove
the cover.
2. Insert batteries
observing the correct
polarity (see marks).
3. Replace compartment cover.
BATTERY CHANGE:
It is recommended to replace the batteries in all
units on an annual basis to ensure optimum
accuracy of these units.
Please participate in the
preservation of the environment.
Return used batteries to an
authorized depot.