Vinten Radamec Fusion Camera Control Unit (CCU) - Manual (Page 8)

v
Safety Guidelines
Please read this manual carefully before attempting to operate
the product. Retain this operators guide for future reference.
Safety when working with the product
Take heed of warnings and instructions
You should read all of the safety instructions in this
Operators Guide before attempting to operate the
equipment. Adhere to all warnings in this guide and
on the equipment. Do not attempt to operate this
equipment if you do not understand how to operate
it.
Usage statement
This product is designed for use with Sony cameras
System 700 control protocol as part of the Fusion
control system. The Camera Control Unit is used to
remotely control up to five TV cameras within the
studio environment.
The product is intended for use by television
camera operators, trained to use Vinten Radamec
equipment. Do not use this product for any other
purpose other than that specified in this usage
statement.
Water, moisture and dust
Protect the product from water, moisture and dust.
The presence of electricity near water can be
dangerous. Do not use the product near water and
take care that liquids are not spilled onto the
equipment.
Operating environment
The product should not be used outside the
operating temperature limits. To prevent risk of
overheating, ventilate the product correctly. Refer to
the Technical Data section of this guide for the
operating limits for the product.
Power sources
Connect the product to a power supply of the type
and voltage rating described in the Technical Data
section of this Guide or as marked on the product.
For an emergency power-down, ensure all
personnel are aware of the location of the power
switch on the product and associated equipment
and power supplies.
Servicing
Do not attempt to service this product. Opening and
removing covers may expose you to dangerous
voltages or other hazards. Refer all servicing to
trained service personnel. Contact Camera
Dynamics Ltd or your local distributor to arrange
servicing of this product.
Connections
Turn OFF before connecting or disconnecting any
equipment or making any adjustments to the camera
or associated equipment.
IMPORTANT
!
OFF
Warning symbols in this operators guide
WARNING! Where there is a risk of personal injury
or injury to others, comments appear supported by
the warning triangle symbol. Where there is a risk of
damage to the product, associated equipment,
process or surroundings, comments appear
supported by the word ‘caution’.
ELECTRIC SHOCK Where there is a risk of electric
shock, comments appear supported by the
hazardous voltage warning triangle symbol.
Warning symbols on the product
On encountering the warning triangle it is important
that you read this operators guide before using this
product or attempting any adjustment or repair.
Where there is a risk of electric shock, comments
appear supported by the hazardous voltage warning
triangle symbol.
!
!