Changing the fuse, Adjusting the drag control dials, Figure 14 – Vinten Radamec Fusion FH-100 User Manual
Page 32: Fuse compartment
Advertising
19
Changing the fuse
To replace a fuse:
1.
Switch OFF power to the Head.
2.
Carefully insert a small blunt screwdriver or similar tool into the side of the fuse compartment and lever
out.
3.
Lift out the fuse compartment (Figure 14).
4.
Replace the failed fuse and then replace the fuse compartment, pushing firmly into place.
5.
Switch ON power to the Head.
Adjusting the drag control dials
The pan and tilt drag control dials may require adjustment after prolonged use. These adjustments must be
carried out by competent persons. Contact Vinten Radamec for servicing the FH-100 pan & tilt Head.
Figure 14 Fuse compartment
Advertising