Vinten Radamec Fusion Virtual Reality box (FVR) - Manual (Page 15)

13
Installation
VR Data Port Pin Designations.
The VR Data port transmits the VR data to the studio VR graphics
system. The RS422 pin designations are as follows:
Powering Up
Before powering up the FVR box, ensure that all external cable
connections have been secured correctly.
To power up, operate the on/off rocker switch. The 5V and 12V LEDs
will illuminate.
If the 5V and 12V LEDs do not illuminate, refer to the Troubleshooting
section of this manual.
1 2 3 4 5
6 7 8 9
VR Connector
Pin Number
Function on VR
Connector
Function on VR Studio
System
2 RXD-/RXA TXD-/TXA
6 RXD+/RXB TXD+/TXB
3 TXD-/TXA RXD-/RXA
7 TXD+/TXB RXD+/RXB
Note: Pin number allocations at the VR studio system end are
product-specific.