Vinten Radamec Fusion Virtual Reality box (FVR) - Manual (Page 6)

4
Safety and About this Manual
Maintenance About this Manual
The Vinten Radamec Fusion Virtual Reality (FVR) box has been
designed to integrate with the Fusion FH-100 VR and FHR-120 VR pan
and tilt heads, Canon and Fujinon lenses and the Fusion FP-188 VR
pedestal or FPH-188 VR height drive, or the Quattro SE, coordinating
encoder output from all axes for VR applications. This manual covers
the installation of the FVR box, and its connections with compatible
products and studio equipment.
When installation is complete, the head and head support connected
must be configured before the FVR box is used for VR tracking.
The FVR box can be configured using the VR software application
running on a Windows-based PC or on a Vinten Radamec PDA. The
configuration software is provided on a USB stick for a PC or is pre-
installed on a Vinten Radamec PDA.
For more information on configuring the FVR box, refer to the
installation guides provided on the USB stick or contact Vinten
Radamec.
WARNING! The fitting of non-approved parts and
accessories, or the carrying out of non-approved alterations
or servicing can be dangerous and could affect the safety of
the product. It may also invalidate the terms and conditions
of the product warranty.