Vinten Radamec Quattro SE HPM - Manual (Page 21)

Publication Part No. V3851-4981 Issue 2 19
Maintenance
General
The Vinten Radamec HPM is robustly made to high engineering standards and little attention is
required to maintain serviceability save regular cleaning. Refer to the appropriate section in the
Technical Manual if any defect is apparent. Adjustments and repairs should be carried out only by a
trained and competent person.
Routine checks
During use, check the following:
Check that cables do not become entangled around the pan axis. Rotate the Vector 950E head as
necessary to free the cables.
Check that all cables are connected properly. Re-fit cables if necessary.
No further routine maintenance is required.
Cleaning
WARNING!
Always check cables for signs of damage. Damaged cables may cause
injury to personnel and/or damage the equipment.
WARNING!
1. Disconnect power from the product before cleaning.
2. This product has been designed for indoor use. Protect from
water, moisture and dust.