Voltage Valet V85 User Manual

Voltage valet

Advertising
background image

We guarantee each converter to be free from defects in

material or workmanship and to perform under normal use

and service. This guarantee shall run for a period of one year

from the date of purchase, and obligations under this guaran-

tee are limited to remedying any defect or replacing any

defective part and shall be effective only if the defective unit is

returned to us within 12 months after purchase. Damage due

to misuse, overuse, or overloading is not covered by this

guarantee. We shall not be responsible for any other loss or

damage that my arise through the use by a purchaser or

others of this device, and the purchaser assumes such

responsibility and will hold Hybrinetics, Inc. harmless in

respect to all such loss or damage. Important: This is a

factory direct warranty. Do not return defectives to your

retailer. All defectives must be returned to the factory

accompanied by a sales receipt with the original date of

the purchase. For questions or further information,

please call our toll free number: (800) 247-6900

Voltage Valet Division, Hybrinetics, Inc.

225 Sutton Place, P.O. Box 14399

Santa Rosa, CA 95402

©2007 Hybrinetics, Inc.

One Year Warranty

Instructions

Voltage Valet

85 Watt Step-Down

Foreign Electricity Converter

Model V85

Figure 1

Front View

Figure 2

Wire Support Bracket

-Fold support bracket out

for use where receptacle

is not recessed

Fuse Compartment

-

Remove cover for spare fuse

and working fuse

Operation Light

Plug Receptacle

(For Appliance)

Back View

Side View

Continental

Europe Pins

The Model V85 coverts 220/240 volt foreign

electricity to North American standard 110/120

volts. Its step-down transformer produces a true

sine wave output for use with electronic devices

rated up to a maximum of 85 watts. See examples

below.

DO NOT USE with ANY electronic devices that

require more than 85 watts.

Answering Machines

Battery Chargers

Calculators

Camcorders

Computer Monitors/

Printers

Contact Lens

Disinfectors

Curling Irons

Electric Razors

Mini Stereo Systems

Oral Hygiene Devices

Portable Fax

Machines

Radios

Video Games

1. Read all instructions before using converter.

2. Insert plug from your 110/120 volt device into

the converter.

3. Plug converter into a 220/240 volt wall outlet.

Operation light will come on and you are

ready to turn on your device. See Figure 3.

Note: If outlet is not recessed, fold out wire

support bracket and then plug converter into

outlet. See Figure 2.

4. For best results unplug your converter from

the wall outlet when not in use.

Figure 3

• Before using your Voltage Valet converter check to see

if the electrical outlet is 110 /120 volts or 220/240

volts. The converter will not work in a 110/120 volt

outlet.

• This converter is equipped with two round continental

Europe pins which are used with most 220/240

electrical outlets. You may need an additional adaptor

plug in some countries. Ask your Voltage Valet dealer

for the appropriate adaptor plug.

• The Voltage Valet 85 Converter is equipped with a

safety fuse that will “blow” if the converter is used with

devices exceeding its 85 watt rating. If this occurs,

unplug the converter from the wall outlet, allow it to

cool and replace fuse. A spare fuse is packed in the

fuse compartment. See Figure 2.

• Motorized devices may operate a bit slower when used

in foreign countries. This is normal and will not harm

your device.

• The Voltage Valet 85 Watt Converter accepts grounded

North American plugs but DOES NOT continue the

ground to the foreign electrical outlet.

General Information

How to Use Your

Voltage Valet 85 Watt Converter

Important Please Read...

Advertising