Voltage Valet 2CE User Manual

Currency converter, Voltage valet

Advertising
background image

VOLTAGE VALET™

Currency Converter

Model 2CE

658.3

� � �

� �

15.19

15.19

15.19

� � �

� �

6.583

� � �

� �

15.19

� � �

� �

658.3

� � �

� �

How To Use The Currency Converter

NOTE: The exchange rate is the amount of foreign currency needed to buy one (1)

U.S. dollar.

1.Turn on by pressing the ON/C button. Be sure the solar cell is exposed to an

indoor or outdoor light source. A “0” will show in the display. NOTE: Do not

cover the solar cell with your hand when holding the currency converter.

2.To set a foreign currency exchange rate: Enter the amount of foreign currency

needed to buy one (1) U.S. dollar. Press the

PROGRAM CURRENCY button once and the rate

is set. To check the programmed foreign

exchange rate, enter “1” then press the FOREIGN CURRENCY button and the

set rate will appear in the display with the indicator across from FC. (Example:

If the foreign currency exchange rate = 6.583, enter 6.583, then press

PROGRAM CURRENCY.) NOTE: The foreign currency exchange rate will stay

in the memory until you program a new rate.

3.To convert foreign currency to U.S. currency: Once the exchange rate is

programmed (Step 2 above), enter a foreign

currency amount, then press the US$ button.

(Example: If the foreign currency amount is 100,

enter 100, then press US$.) When the exchange rate in Step 2 is used, the

display will read 15.19 which is the amount in U.S. dollars.
4.To convert a U.S. currency to foreign currency: Once the exchange rate is

programmed (Step 2 above), enter a U.S.

currency amount, then press the FOREIGN

CURRENCY button. (Example: If the U.S. currency

amount is $100, enter 100, then press FOREIGN CURRENCY.) When the

exchange rate in Step 2 is used, the display will read 658.3 which is the amount

in foreign currency.
NOTE: In the currency converter mode pressing the CE button will remove the

US$ or FC indicator from the display. The display entry will remain.

How To Read The Display

On the left side of the display, a lower dot indicates the answer is in U.S.

currency; an upper dot indicates the answer is in the Foreign Currency (FC).

How To Clear The Display

NOTE: This will not clear the programmed exchange rate. The exchange

rate remains in memory until you program a new rate or change the

battery.

1. Press once on the ON/C button.

How To Use As A Calculator

NOTE: When using as a calculator DO NOT press the PROGRAM

CURRENCY, FOREIGN CURRENCY or US$ button.

Clear the display by pressing the ON/C button. Proceed with calculation.

Clear Last Entry: Press the CE button.

Memory: Use the M+ button to add a value to the memory. Use the M-

button to subtract a value from the memory. Use the MRC button to view

value in memory. Press the MRC button twice to clear the memory.

Percentage: To compute a percentage enter a value followed by one of the

functions you wish to perform (+, -, x, ) then enter a percentage value and

press the % button. Example: To find 25% of 200, enter 200 then press the

x button then enter 25 and press the % button. The display will show 50.

How to Shut Off

Press the OFF button.

Solar Cell

The currency converter is powered by a solar cell; no batteries are required.

The solar cell is located adjacent to the display and must be exposed to

indoor or outdoor light. DO NOT cover the solar cell with your hand when

operating.

One Year Warranty

We guarantee each new Currency Converter to be free from defects in material or workmanship and

to perform under normal use and service. This guarantee shall run for a period of one year from the

date of purchase, and obligations under this guarantee are limited to remedying any defect or

replacing any defective part and shall be effective only if the defective unit is returned to us within 12

months after purchase. Damage due to abuse or misuse is not covered by this guarantee. We shall

not be responsible for any other loss or damage that may arise through the use by a purchaser or

others of this device, and the purchaser assumes such responsibility and will hold Hybrinetics, Inc.

harmless in respect to all such loss or damage.

IMPORTANT: This is a factory direct warranty. Valid in the U.S. and North America only. Do not

return defectives to your retailer. All defectives must be returned to the factory accompanied by a

sales receipt with the original date of purchase. For more information please call our toll free

number: (800) 247-6900.

Voltage Valet Division, Hybrinetics, Inc.

225 Sutton Place, Santa Rosa, CA 95407

© 2004 HYBRINETICS, INC.

Advertising