Welch Allyn OAE Data Manager - User Manual - Manual (Page 35)

Typical use case: Transfer patient names to
screener and data to the data manager
Typical use case
A typical use of the data manager would be to:
• Transfer patient names to the screener at the start of the day
• Test patients
• Transfer data to the data manager database
• Print test results
Transfer patient names to the screener and test
1. Launch the data manager.
2. Click New Patient to add all patient names to be tested.
3. Turn on the screener and connect the screener to the computer.
4. Click Names.
5. Drag the patient names to be tested from the patient list to the Store Names to
Instrument window.
6. Click Store Names to transfer patient names to the screener.
7. Disconnect the screener from the computer.
8. Complete all of the testing using the screener
Test patients
See the Welch Allyn OAE screener Directions for use for instructions on using the
device for testing.
Transfer results from the screener to the data manager
To transfer results from the screener to the data manager database:
1. Plug the USB cable connector into an available USB port on the computer and the
Micro-USB cable connector into the port at the base of the screener.
The screener displays the message, “Waiting for PC,” detects the connection to the
computer, and waits for an action or communication from the data manager.
31