Welch Allyn CardioPerfect Workstation Exercise ECG Module - User Manual - Manual (Page 24)

CardioPerfect Workstation
Exercise ECG Module - User Manual
DIR 80012335 Ver. E 24 / 83
Load change
Change
Keyboard
keys Treadmill Increment/
decrement Ergometer Increment/
decrement
[CTRL + ↑] Elevation + + 1% Load + + 5 Watt
[CTRL + ↓] Elevation - - 1% Load - - 5 Watt
[CTRL + →] Speed + + 0.1 km/h N/A
[CTRL + ←] Speed - - 0.1 km/h N/A
When a key combination is pressed, e.g. [CTRL+↑], when the load change window is not
visible, the load change window will pop-up and the corresponding load will change.
When the 'Instant manual load changes' option is enabled (Exercise ECG settings,
Devices tab), changes of the load are instant and confirmed.
The change workload window will have the following appearance:
Ergometer :
Treadmill :
Upon changing, the values will immediately be sent to the exercise device.
When the 'Instant manual load changes' option is NOT set, the form has the following
characteristics:
Ergometer :
Treadmill :
When OK is pressed, the new values will be sent to the device. When Cancel is pressed,
changes are ignored and the dialog window will close.