Welch Allyn CardioPerfect Workstation ABP Module - User Manual - Manual (Page 16)

CardioPerfect Workstation
ABP Module - User Manual
DIR 80012332 Ver. E 16 / 40
3. Viewing an ABP test
3.1 View an ABP test
To view an ABP test:
1. In the patient list, select the patient whose test you want to view. The tests that
have been recorded for that patient are listed in the test list.
2. From the test list, select the ABP test that you want to see. ABP tests are indicated
with . The ABP module is started automatically, and the test is displayed in the
workspace.
3.2 View and add information
You can view information that was entered when the test was recorded. Additionally, you
can add your own comments.
To view information about the test:
In the Tools menu, click Information. The Information dialog box is displayed.
To enter your own comments:
In the Comment section of the Information dialog box, start typing and click OK.
3.3 Views
With the ABP module, you can view ABP test results in seven different views:
Measurements and events
Hourly intervals
Trends
Summary
Scatter points
Rise and fall
Exceeding norms
Frequency distribution