Welch Allyn CP 200 Spirometry Option - User Manual - Manual (Page 49)

Directions for Use Chapter 4 Performing Spirometry Tests 45
To Change a Test’s Interpretation Statements
From the Test Results main screen ( Figure 30 on page 43), follow these steps:
1. Press Add/Edit Interps.
The following screen appears, displaying any interpretation statements that have
been saved with the test.
Figure 32. “Add/Edit Interpretations” Screen
2. Add or edit interpretation statements as desired.
Each test may include up to four statements — either automatically included, or
manually added, or a combination. If automatic statements appear, you may replace
them with manual statements if you wish.
3. Press to cancel or to save your changes.
The Test Results main screen reappears, as shown in Figure 30 on page 43.
• To learn how to change the statements that are available to choose, see “Reviewing
the Interpretation List” on page 20.
• To learn how to enable automatic interpretation, see “Enable ATS Interp. Results” on
page 14.
• To learn how the automatic interpretation software determines the degree of
obstruction or restriction, see
“Understanding Your Interpretation Results” on
page 74.
Test Results
9:17AM Oct 16 08 Doe, Jane
Add/Edit Interpretations
Interpretation #1:
Interpretation #2:
Interpretation #3:
Interpretation #4:
Cancel = Save =
Press a right arrow key to see a list of
interpretation statements that are
available to choose for the highlighted
field.