Welch Allyn CP 200 Spirometry Option - User Manual - Manual (Page 20)

16 Chapter 2 Reviewing the Spirometry Settings Welch Allyn CP 200 Spirometry Option
Reviewing the Spirometry Screen Settings
The spirometry screen is the first screen that displays after you enter patient data.
For example, see
Figure 28 on page 41. To review or change the settings for this screen,
follow these steps.
1. Press the Menu key .
2. Choose Spirometry Settings > Screen Settings.
The following screen appears.
Figure 4. “Spirometry Screen Settings” Screen
3. Change any desired settings.
Setting Description
Select Default FVC Curve Choices: volume/time, flow/volume, tidal volume, incentive. The selected default
curve appears first whenever you begin FVC testing.
Select FVC Display
Parameters Choose which FVC-test parameters to display during testing.
Choices (up to eight): FVC, FEV1, FEV1%, FEV6, PEF, FEF25-75, FEV0.5, FEV2, FEV3,
FEV5, FEV1/FEV6, FEV0.5%, FEV2%, FEV3%, FEV5%, FEV6%, FEF25, FEF50, FEF75,
FEF0.2-1.2, FEF75-85, FET, FIVC, FIV1, FIV1%, PIF, FIF50, FEF50/FIF50.
Note: For SVC testing, these parameters always display: SVC, ERV, IRV, VT, BF, Tin/
Tex.
Spirometry Screen Settings
9:17AM Oct 16 08
1 Select Default FVC Curve
2 Select FVC Display Parameters
0 Previous Menu