Welch Allyn TMX428CP Trackmaster Medical Treadmill - User Manual - Manual (Page 56)

Parts List with Part Numbers
8-10
Item Description
1 Motor Pan Assembly TMX428
2 Side Channel LH Weldment
3 Side Channel RH Weldment
4 Rear Foot
5 Stem Bumper
6 Bracket Motor Pan Right
7 Bracket Motor Pan Left
8 Bolt HHCS ¼-20 x .75” Lg Gr 5
9 Flat Washer ¼” Dia
10 Lock Washer ¼” Dia
11 Nut HN ¼-20 Grade 5
12 Landing Gear Assembly
13 Bumper 1.8” Dia Black
14 Shoulder Bolt HSHSS 5/8” Dia x 1” Lg
15 Elevation Delrin Spacer
16 Flat Washer ½” Dia
17 Nylon Lock Nut NLN ½”
18 Bolt HHCS 3/8-16 x 3” Lg
19 Washer Nylon
20 Nylon Lock Nut 3/8-16
21 Belt Drive
22 Anti Slip Safety Walk “Cut 1.5” x 4”
TRACKMASTER
TMX428 Owner’s Manual
Frame Assembly
Description Part Number
Motor Pan Assembly TMX428 317-Various
Side Channel LH Weldment 317-704-001
Side Channel RH Weldment 317-705-001
317-706-001
317-160-141
Motor Pan Right 317-708-001
Bracket Motor Pan Left 317-707-001
20 x .75” Lg Gr 5 001-1186
001-1439
001-1450
20 Grade 5 001-1386
Landing Gear Assembly 317-702-001
Bumper 1.8” Dia Black 317-160-106
Shoulder Bolt HSHSS 5/8” Dia x 1” Lg 001-1730
Elevation Delrin Spacer 317-160-060
001-1443
Nylon Lock Nut NLN ½”-13 001-1676
16 x 3” Lg Grade 5 001-1699
317-160-086
16 001-1430
317-160-026
Anti Slip Safety Walk “Cut 1.5” x 4” 317-160-084
ACTUATOR INSTALLATION NOTES:
1. PRIOR TO INSTALLATION OF BOLT, TURN
ACTUATOR END CLOCKWISE UNTIL IT STOPS.
NEXT TURN COUNTER CLOCKWISE 1 ½ TURN OUT
PLUS ANY ADDITIONAL REVOLUTION TO ALLOW
BOLT ALIGNMENT.
2. WHEN TIGHTENING ELEVATION BOLT AND NUT
THE WASHERS MUST MOVE FREELY.
TRACKMASTER
July 2014
Part Number Qty
Various 1
001 1
001 1
001 1
141 2
001 1
001 1
1186 26
1439 26
1450 26
1386 26
001 1
106 2
1730 2
060 4
1443 2
1676 2
1699 1
086 4
1430 1
026 1
084 2
PRIOR TO INSTALLATION OF BOLT, TURN
ACTUATOR END CLOCKWISE UNTIL IT STOPS.
COUNTER CLOCKWISE 1 ½ TURN OUT
PLUS ANY ADDITIONAL REVOLUTION TO ALLOW
WHEN TIGHTENING ELEVATION BOLT AND NUT
MUST MOVE FREELY.