Welch Allyn Image Capture System - User Manual - Manual (Page 29)

25
The Image Capture
System is not working at
all.
You need to install .NET
Framework 1.1
The Image Capture System
application requires version 1.1
of the .NET Framework. The
Image Capture System
installation program checks the
target computer for the
existence of this version of the
framework. If it is found, this
step of the installation process
is skipped. If it is not found,
version 1.1 of the .NET
Framework is installed. If you
must manually install the .NET
Framework from the
installation CD, perform the
following steps:
1. Load the Image Capture
System installation CD into
an available CD-ROM drive.
If the installation program
initiates, click the "Cancel"
button to shut it down.
2. From the task bar click
"Start" and then click the
"Run" option.
3. Using the drive letter of the
CD-ROM drive, assuming it
is D:, type
"D:\NET Framework
1.1\dotnetfx.exe" then click
the "OK" button.
4. This will launch the .NET
Framework installation
program. When prompted,
click "Yes" to continue with
the installation.
5. At the "License Agreement"
screen, click "I agree" then
click the "Install" button.
This step of the procedure
takes a few minutes. When
prompted, click the "OK"
button. Installation of the
.NET Framework 1.1 is now
complete.
Problem Cause Solution