Welch Allyn 1500 Patient Monitor Software version 1.4.X, - Quick Reference Guide - Manual (Page 3)

3
Function buttons
Print
Prints out three waveforms and
the parameter measurements
(the printer is an option).
Alarm silence
Silence / resume an audible
alarm. The silence duration is
defined in Setup > Administrator.
NIBP measurement interval
Sets the interval for non-invasive
blood pressure measurement or
turns off the interval
measurement.
NIBP measurement
Starts or stops an NIBP
measurement.
Standby / Discontinue /
Discharge
Interrupts or discontinues
monitoring.
Setup
Displays the Setup menu. The
Setup menu includes alarm
suspend and alarm overview,
speaker and HR/PR volume,
patient information and patient
mode selection (adult, pediatric,
neonatal), and the administrator
settings. Menu items are
selected by turning and pressing
the trim knob.
Trend
Displays trend data and defines
trend intervals. Home
Pressing this button returns to
the monitoring screen. Any open
dialogue screen is closed and
settings saved.
On/Off
Press to switch on. Press and
hold for 4 seconds to switch off. Trim knob
The trim knob is used for
navigation, value selection and
value change.