Welch Allyn SureTemp Plus Adult Axillary Temperature - Quick Reference Guide - Manual

1. Ensure that the probe with the blue
ejection button and blue probe well are
installed.
2. Remove the probe from the probe well.
3. Press Mode Selection button to select the
Adult Axillary Mode.
4. Observe the Adult Axillary Mode indicator on
the display (flashing axillary icon).
5. Load a Welch Allyn probe cover.
6. Adjust clothing to visualize the axilla.
7. Avoid folds in the axilla and place the probe
tip vertically as high as you can as shown.
8. Place the arm at the patient’s side. Hold in this
position without movement of the arm or
probe during the measurement cycle.
Adult Axillary
Temperatures with
SureTemp
® Plus
Models 692/690