Canon DC301 - Manual (Page 30)

30 • Video
again the camcorder is
ready to start recording within approx.
1 second*, ensuring you do not miss
important shooting opportunities.
* The exact time required until the camcorder
is ready to start recording may vary
depending on the shooting conditions.
1 Press firmly.
The standby lamp flashes at first
while the camcorder is preparing and
then stays on when it enters the
standby mode.
2 When you wish to resume
recording, press
again.
Within approx. 1 second, the
camcorder is ready to record.
NOTES
• When you wake up the camcorder from
standby mode, the following settings will
be changed automatically:
- Manual focus returns to automatic
focus (AF).
- Manual exposure adjustment returns to
automatic exposure.
- Zoom position returns to full wide
angle W.
• The camcorder will shut off if left in
standby mode for 10 minutes, regardless
of the [POWER SAVE] setting (
65).
You can select the length of time until
shut-off with the [ STANDBY OFF]
setting ( 65).
To restore the power if the camcorder
shut off, turn the
switch toward
MODE and release it, or turn the
camcorder off and then on again.
• If you perform any of the following
actions while in standby mode (while the
standby lamp is on), the camcorder will
be woken up from standby mode.
- Open the disc compartment cover.
- Change the position of the
/
switch.
- Turn the switch toward MODE.
Reviewing and Deleting the Last Scene
Recorded
Even in mode you can play
back the last scene recorded in order to
check it. If you are using a DVD-RW
disc, you can also delete the scene
while reviewing it.
1 If the joystick guide does not
appear on screen, press
to
display it.
If does not appear on the joystick
guide, repeatedly push the joystick
(
) toward [NEXT] to display it.
2 Push the joystick ( ) toward .
• The camcorder plays back the last
scene (but without sound) and
returns to record pause mode.
• While reviewing the scene, select
the icon and press to return
to the recording mode.
( 18)
QUICK START
QUICK START
QUICK START
( 18)
NEXT
D126_NTSC_PAL_E.book Page 30 Tuesday, January 15, 2008 12:15 PM