Canon DC301 - Manual (Page 9)

Introduction • 9
Thank you for purchasing the Canon DC320/DC311/DC310/DC301. Please read this
manual carefully before you use the camcorder and retain it for future reference.
Should your camcorder fail to operate correctly, refer to
Troubleshooting ( 67).
Conventions Used in this Manual
• IMPORTANT: Precautions related to the camcorder’s operation.
• NOTES: Additional topics that complement the basic operating procedures.
• POINTS TO CHECK: Restrictions that apply if the function described is not
available in all operating modes (the operating mode to which the camcorder
should be set, the type of disc required, etc.).
• : Reference page number.
• : Text that applies only to the model(s) shown in the icon.
• The following terms are used in this manual:
“Screen” refers to the LCD and the viewfinder screen.
“Scene” refers to one movie unit from the point you press
to start
recording until you press again to pause the recording.
The terms “photo” and “still image” are used interchangeably with the same
meaning.
• The photos included in this manual are simulated pictures taken with a still camera.
• Note that unless indicated otherwise, screenshots and illustrations in this manual
refer to the model.
About this Manual
Start/Stop
Changing the Language
Options Default value
[ ]
[ DISPLAY SETUP]
[LANGUAGE ]
Desired language
[ ] [MAGYAR] [ ]
[DEUTSCH] [MELAYU] [ ]
[ ] [POLSKI] [ ]
[ENGLISH] [ ] [ ]
[ESPAÑOL] [TÜRKÇE] [ ]
[FRANÇAIS] [ ] [ ]
[ITALIANO] [ ] [ ]
FUNC.
(
29)
ROMANA
FUNC.
FUNC.
MENU
Names of buttons and switches other than the joystick
are indicated within a
“ button ” frame.
For example . FUNC.
Buttons and switches to be operated
Brackets [ ] and capital letters are used to refer to menu
options as they are displayed on screen. In menu option
lists and option tables the default value is shown in
boldface.
For example
[ON], [OFF].
D126_NTSC_PAL_E.book Page 9 Tuesday, January 15, 2008 12:15 PM