Welch Allyn CP150 - Quick Reference Guide - Manual (Page 22)

• Recharge the battery.
• Replace the battery.
The electrocardiograph prints fewer than 10 reports on a full battery
charge
Causes
•
The battery is degraded.
Actions
•
Replace the battery.
The electrocardiograph does not respond when you press buttons or
touch the screen
Causes
•
The electrocardiograph is frozen.
Actions
•
Reset the electrocardiograph by pressing and holding the power button for at least
six seconds until the screen goes blank. Press the power button again. The
electrocardiograph goes through some diagnostic tests that cause it to take longer
than usual to power up.
Note For more troubleshooting guidelines, see the service manual.
CAUTION The service manual is for use only by qualified service
personnel who understand technical English.
18 Troubleshooting CP 150 12-lead resting electrocardiograph