Clarion VRX633R - Manual (Page 31)

VRX633R
35
English
Owner
’s manual
Manual tuning
1. Press the FNC button 1 to select DAB mode.
2. Press and hold the BND button % for 1 sec-
ond or longer.
3. Select right or left to select a station using
the SEARCH button 2 .
∗
The unit stops the seek tuning when it cannot
find a DAB station. The display returns to the
previous mode.
Note:
• Manual tuning is cancelled if you do not operate
the unit for 7 seconds or longer.
Recalling a preset station
This unit has another preset memory function for
DAB stations. Up to 18 stations (6 for each
[MEM1], [MEM2] and [MEM3]) can be preset in
the PRESET buttons
# .
1. Press the FNC button 1 to select DAB mode.
2. Press the BND button % to select anyone of
[MEM1], [MEM2] and [MEM3]. Each time you
press the BND button
% , the display changes
in the following order:
[MEM1] ➜ [MEM2] ➜ [MEM3] ➜ [MEM1]...
3. Press the corresponding the PRESET button
# to recall the stored station.
Note:
• Press and hold one of the PRESET buttons
# for
2 seconds or longer to store that station into pre-
set memory.
Manual memory
1. Press the FNC button 1 to select DAB mode.
2. Press the BND button % to select anyone of
[MEM1], [MEM2] and [MEM3].
3. Select the desired station using seek tuning,
manual tuning or preset tuning, using the
SEARCH button
2 .
4. Press and hold one of the PRESET buttons
# for 2 seconds or longer to store the cur-
rent station into preset memory.
Digital Radio/DAB Operations
Switching programmes
1. Press the FNC button 1 to receive a DAB
station.
2. Select right or left to switch programmes in a
DAB station using the SEARCH button 2 .
Note:
• Programmes may not be switched depending on
DAB station or broadcasting time.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press the FNC button 1 to receive a DAB
station.
2. Press the PS/AS button 5 . The unit starts
scanning each programme for 10 seconds se-
quentially.
3. When a programme which you want to listen
is tuned in, press the PS/AS button 5 once
again.
AF function
The AF function switches to a different frequency
on the same network in order to maintain opti-
mum reception.
∗
The factory default setting is “ON”.
● Switching OFF the AF function
Press the AF button 7 , the “AF” indicator goes
off.
● Switching ON the AF function
Press the AF button 7 , the “AF” indicator lights.
∗
If the reception of the current broadcast station
deteriorates, “SEARCH” lights in the display and
the radio searches for the same programme on
another frequency.
∗
When AF is ON, if the reception of an RDS broad-
cast deteriorates, the AF indicator flickers.
● AF function between RDS and DAB
Refer to the item of RDS tuner.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗
RDS interrupt does not function during AM radio
reception or in TV mode.