Clarion VRX633R - Manual (Page 32)

36
VRX633R
English
Owner
’s manual
Digital Radio/DAB Operations
Information select
This function allows selecting a type of INFOR-
MATION on INFORMATION interrupt mode. You
can set any of the 6 types of INFO below:
TRAFFIC, WARNING, NEWS INFO, WEATHER,
EVENTS, SP. EVENT
∗
This function is enabled only when the panel is
open.
1. Press the ADJ button £ .
2. Operate the JOYSTICK § upward or down-
ward to select “INFO SEL”. Press the ENT at
the center of the JOYSTICK
§ to change into
the INFO selecting display.
3. Operate the JOYSTICK § upward or down-
ward to select a desired INFORMATION. “ON”
and “OFF” items are displayed to the right.
4. Operate the JOYSTICK § rightward or left-
ward to select “ON” and press the ENT at the
center of the JOYSTICK
§ to set it.
5. When the setting is finished, operate the JOY-
STICK § rightward or leftward to move the
cursor to the “MENU”. Then press the ENT at
the center of the JOYSTICK
§ to return to
the adjustment display.
PTY
This function enables you to listen to the selected
programmes type, irrespective of the function
mode.
∗
RDS interrupt does not function during AM radio
reception or in TV mode.
∗
DAB and RDS have the same PTY.
∗
You can select one PTY from DAB or RDS.
∗
PTY broadcast are not yet available in all coun-
tries.
∗
In INFO standby mode, INFO stations have prior-
ity over PTY stations.
∗
In TA standby mode, TP stations have priority over
PTY broadcasting station.
Selecting PTY
1. When you press the PTY button 8 , the unit
goes into PTY select mode.
2. Press any one of the PRESET buttons # to
select the desired PTY. Alternatively, when the
panel is closed, operate the SEARCH button
2 upward or downward to select a desired
PTY.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press the TA button 0 when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into TA standby mode until a
traffic announcement is broadcast. When a traf-
fic announcement broadcast starts, “TRA INFO”
appears in the display. If you press the TA button
0 while a traffic announcement broadcast is be-
ing received, the traffic announcement broadcast
reception is cancelled and the unit goes into TA
standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press the TA
button
0 . The “TA” indicator in the display goes
off and TA standby mode is cancelled.
∗
If “TP” is not lit, pressing the TA button 0 searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press the TA button
0 , the “TA” in the display lights and the unit au-
tomatically searches a TP station.
Information standby mode
When the INFORMATION programme selected
in the “INFO SEL” display of the adjustment mode
starts, the unit switches to the selected INFOR-
MATION programme automatically.
∗
For details on “Information select”, refer to the
procedure below.
1. Press the TA button 0 , for 1 second or longer,
“INFO” lights in the display and the unit is set
to INFORMATION standby mode until INFOR-
MATION starts.
* If you press the TA button 0 while the INFOR-
MATION programme is being broadcast, the
programme broadcast is cancelled and the unit
enters INFORMATION standby mode.
2. To cancel INFORMATION standby mode,
press the TA button 0 again for 1 second or
longer.
Note:
• Only in case of DAB connection, this can be oper-
ated even in the RDS tuner mode.