Welch Allyn Calibration/Verification Braun Thermoscan - Quick Reference Guide - Manual

Calibration/verification of the Braun
ThermoScan device
A Welch Allyn authorized service center must perform individual module calibration and verification
activities.
NOTE: The tests are product specific.
Welch Allyn service test equipment and training is available. Contact Welch Allyn Customer
Service for information.
Braun ThermoScan display and error codes
Display Definition/Description Required action
Display indicates normal operation
after reading is taken.
None.
Display indicates normal operation
after device is turned off.
None.
Turn device on.
Display indicates reading stored in
memory.
None.
See manufacturer's instruction
guide.
Setting used to change the default
temperature scale. See manufacturer's instruction
guide.
Calibration mode.
See manufacturer's instruction
guide.
Setting displays hours remaining
before anti-theft function of the device
is enabled and device is locked.
None.
See manufacturer's instruction
guide.
Anti-theft function of the device is
enabled; device is locked.
Return device to station for
unlocking.
See manufacturer's instruction
Page 1 of 5 Calibration/verification
9/28/2010 file://C:\Documents and Settings\grahamw1\Local Settings\Temp\~hhD427.htm