Welch Allyn Connex Vital Signs Monitor Base Set - Quick Reference Guide - Manual (Page 2)

Change view of vital signs measurements
Parameter frames that support multiple views of patient data (such as numeric and
waveform, numeric and trend, SYS/DIA and MAP) include a view indicator
next to the name of the parameter frame.
Touch the left side of the parameter frame to toggle between views.
Enter manual parameters
1. Touch the Manual parameters frame.
2. Touch the keypad in selected fields to adjust the parameter measurements.
3. Touch
OK.
Note Entries will not be saved unless you touch OK.
© 2013, Welch Allyn, Inc. All rights reserved. Mat. No. 720693, 80018643 Ver. A
Alarm indicators and controls
Icon Description
Alarm off
No visual or audio notifications are enabled.
Alarm on
Visual and audio notifications are enabled.
Alarm audio off
Only visual notifications are enabled.
Alarm audio paused
Countdown timer is active.
Alarm active
Touch to pause or silence.
Multiple alarms active
Touch to pause or silence.
Medium priority alarm
Touch to adjust alarm limits or turn off alarm.
High priority alarm
Touch to adjust alarm limits or turn off alarm.
104703