Welch Allyn Holter Software PCH100 and PCH200, LAN - Installation Guide User Manual
Page 14
14
7.
Installing the LAN Client on Client System
Overview:
•
Start application installation using Installation Guide (section 2).
•
Select LAN Client to install
•
Finish application installation instructions
7.1 Refer to document 006-700-0075(WA Holter System Instruction Guide) for installing the application. Follow the instructions for Standalone
Installation (section 2) through step 2.7 and stop when the following screen is displayed.
7.2 This screen will appear prompting the user to select which product to install. Select LAN Client then proceed by clicking “Next”.
7.3 Using 006-700-0075(WA Holter System Instruction Guide) complete the Standalone Installation instructions following any additional
instructions required by the guide.
8.
Connecting the LAN Client to the Server
Overview:
•
Start application
•
Search for database
•
Log on
8.1 When the LAN Client has been installed, make sure that there is a LAN Server running, then start the application.
8.2 The following screen will be shown when the application starts: