Welch Allyn Holter Software PCH100 and PCH200, LAN - Installation Guide - Manual (Page 15)

15
8.3 Click the OK button to proceed to the database selection screen as shown below:
8.4 If the name of the server is not known, use the “Find Database” button to search for running LAN Servers on the network. If the name of the
LAN Server is already known, this can be entered under the “SQL Server Instance Name field” using the format example shown.
8.5 Once the server is either selected or manually entered, click the OK button to initiate the connection. If this is successful, the login screen
should appear as shown below and the client application will be ready for use.
8.6 Use one of the logon names created by the admin in steps 5.1 and 5.2. Initial password for the account is the same as the username but the
user will be prompted to change the password before they can log on.
8.7 If there is a free user session available then the Client will connect to the Server. Note that only 3 users may be connected at any time unless
addition licenses have been added to the system (See section 2).