Welch Allyn Cardio Perfect Workstation ABPM6100 Install (Windows XP) Instructions - Installation Guide - Manual

INSTAllINg The ABPM 6100
ReCORDeR ON A CARDIOPeRfeCT
WORKSTATION
1 Plug the recorder into the serial port or
into a USB port.
Install two fresh AA batteries in the recorder. If the recorder is
on, turn it off. (Press and hold the Start/Stop button for five
seconds until the device emits five quick beeps.)
To plug into the serial port if available
Before you start, install the CardioPerfect Workstation software.
See separate installation guide.
All Programs > Keyspan >
USB Serial Adapter > Keyspan Serial Assistant
a
b
(a) Make a note of the COM port that is assigned
to your recorder. In this example, the port is COM5.
(b) Close all windows.
Install the Keyspan software following the Keyspan instructions.
Select all defaults. Keyspan product registration is optional.
Keyspan CD
(included in Keyspan
adapter package)
To plug into a USB port if
no serial port is available
go to Step 2.
Windows ® XP
C A R D I O P E R F E C T ™
WORKSTATION
INSTA L L ATION GUIDE
Start/Stop button
go to Step 2.
Start/Stop button
Keyspan adapter