Install the acuitylink clinician notifier program – Welch Allyn Acuitylink Clinician Notifier, SW Install Instruction, Aculink Clin Not 1.4X - Installation Guide User Manual
Page 9
3
5
Install the AcuityLink Clinician
Notifier program
You will take these steps in this chapter:
•
Copy the AcuityLink Clinician Notifier program from the AcuityLink CD to a p.c. hard
drive.
•
Using Windows Mobile synchronization software, copy the AcuityLink Clinician
Notifier program to the mobile device.
•
Install the Clinician Notifier program on the mobile device.
Copy the AcuityLink Clinician Notifier program to a p.c.
hard drive, and configure the files
To copy AcuityLink Clinician Notifier software to a temporary location on a p.c. hard
drive
1.
On your p.c., open the Windows My Computer directory.
2.
Right click the
AcuityLink CD item, and then click Open.
3.
Open the Clinician Notifier software folder.
4.
Locate a subfolder named with the mobile device that your facility will use to run
AcuityLink Clinician Notifier software.
5.
Copy and paste the mobile device subfolder to any temporary location on the p.c.
local hard drive.
Configure the Clinician Notifier files
You must take the following steps to prevent these problems after the AcuityLink
Clinician Notifier program is reset:
•
Missing Clinician Notifier icon in the device Start menu,
•
Multiple Clinician Notifier icons in the Programs menu
•
A popup message stating that Clinician Notifier is already installed.
1.
In the p.c. temporary location, open the mobile device subfolder.
2.
Take these steps for every file within the mobile device subfolder:
a.
Point the cursor on the file, and click the right key of the pointing device.
Note
If your device does not contain an appropriately named subfolder, go to
for information on installing the AcuityLink Clinician Notifier
software on your device.