Welch Allyn Propaq LT, Propaq CS and Micropaq monitor, Radio Configuration - Installation Guide - Manual (Page 12)

12 80016835 Ver A Welch Allyn
4. Log on to the radio configuration tool.
a. User name: admin
b. Password: webpassword1234.
If you want to change your password, do the following:
a. Click Web admin password from the options on the left.
b. Enter a new password in the Enter new password field.
c. Enter the same password in the Confirm new password field.
d. Click Apply.
Make sure you write down your new password. If the new password is lost or
forgotten, it can not be recovered.
5. Click Authentication and Encryption from the options on the left. The
Authentication and encryption screen appears.
6. Select the authentication and encryption scheme you want to use and click Apply.
7. If the change is accepted, a confirmation box appears.
Note Do not force authentication of your radio. Follow all steps in this procedure in
order and restart your monitor to authenticate.